• Automatic call type detection: Voice/Modem/Fax
• Answer and Disconnect Supervision
• Trunk group support
• Public and private dial plan support
• User programmable dial plan support
• Forced routing
• Pass-through support for calls to Toll Free, local and special service numbers (emergency services, etc.)
• Automatic appending and stripping of digits to dialed numbers
• Call Detail Records
• Least Cost Routing with external Quintum VoIP Call Routing Server*
• Caller ID Name and Number

TECHNICAL SPECIFICATIONS

Telephony Specifications
• Voice algorithms: G.723.1 and G.729ab, G.711
• Auto codec negotiation
• Fax Support: Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps, sing industry standard T.38; Super G3 compatible up to 33.6 Kbps
• Modem support with G.711
• Choice of 1 or 2 T1/E1/PRI Spans
• Standard RJ-45 Connectors
• Coding: A-law, ΅-law
• Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G 168, up to 128 msec tailsize
• PRI Signaling Protocols: National ISDN-2, Euro ISDN NET5, Japan INS-NET1500, KDD, 4ESS, 5ESS, DMS100
• T1 CAS (E&M, Loop Start, Feature Group-D, DTMF, MF)
• E1 CAS (R2 MF)
• DASS2
• Tandem/TDM switching
• Maximum Call Rate: 7,200 calls/hour
• VoIP to circuit, and circuit to circuit (Tandem/TDM) switching

IP Network Specifications
• LAN Interface: Fast Ethernet port (10/100Base-T)
• Standard RJ-45 Interface (IEEE 802.3) for 10Base-T or 100Base-TX connections
• QoS Support: IP TOS, DiffServ

VoIP Network Specifications
• Support for multiple SIP User Agents (RFC3261 compliant endpoint)
• DTMF Signaling via RFC 2833 or SIP Info
• SIP Supplementary Services
• Message Waiting Indicator
• SIP Refer Method support
• IVR/RADIUS server support for AAA with integrated multi-lingual IVR+
• Adaptive Voice Activity Detection (VAD) with Comfort Noise
Generation (CNG)
• Adaptive Jitter Buffer
• Packet Loss Concealment
• NATAccess™ - NAT/Firewall
• Security: IP Filtering
• Up to 60 simultaneous VoIP calls
• Support for DNS-SRV

Configuration / Management
• Auto-provisioning
• Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors
• Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring
• Remote access with external Remote Management Session Server for gateway management
• Intel Remote Management Module 2 for remote server management
• SNMPv2 Agent
• Command Line Interface

TENOR HYBRID GATEWAY**

SR 1500
Dimensions:
• Chassis Height: (1U) 1.70” (4.33 cm.)
• Chassis Width (19” rack mounting): 16.93” (43 cm.)
• Chassis Depth: 33” (83.8 cm.)
• Weight: 31 lbs. (14.1 kg.)
• Intel family of Quad-Core Xeon processors
• Raid I mirroring with hot-swappable drives
• Ethernet (IEEE 802.3): 10/1000 Mb Auto-sensing
• LAN connector: 2 x RJ45
• Power Supply: 100 – 240 Vac, 50/60 Hz
• Power Consumption: 600 Watts max
• Operating Temperature: 50Ί F (10Ί c.) – 90Ί F (35Ί c.)
• Storage Temperature: -40Ί F (-40Ί c.) – 158Ί F (70Ί c.)
• Non-Operating Humidity: 90% non-condensing @ 82.4Ί F (28Ί c.)
• EMC Certification: FCC Part 15, EN55022 1994, EN61000-3-2, EN61000-3-3, EN55024 1998
• Safety Certification: UL 60950-1, CSA C22.2 NO. 60950-1, IEC 60950-1
• System Cooling Requirement: 2901 BTU/Hour

Integrated PCI Express Card
• Telco: FCC Part 68
• EMC: FCC Part 15, EN55022 1994, EN61000-3-2, EN61000-3-3, EN55024 1998, EN61000-2-3, EN61000-3-3
• Safety: UL60950, EN60950

* Quintum product purchased separately
+ Original Quintum Tenor Only
** The End of Life of the Tenor Hybrid Gateway 60 product has been announced July 31 2010. Purchase orders for the Tenor Hybrid Gateway 60 must be received no later than September 30 2010; no orders past this date for the Hybrid Gateway 60 product will be accepted. Furthermore, please note orders received before September 30 2010 cannot be guaranteed due to a potential supplier shortage. Please contact your Quintum/NETsalesperson for more information regarding order and support terms and conditions.